Products

Model	Type	Description

NDIR sensor series
IRNET-P	NDIR	'Intelligent' microprocessor based NDIR sensor for Hydrocarbons or Carbon Dioxide. D 20 mm or 32 mm, 3 pin output standard (on request 5 pin for RX/TX).
IRNET-7	NDIR	'Dummy' version NDIR sensor for Hydrocarbons or Carbon Dioxide. D 20 mm or 32 mm, 7 pin raw signal output.
IRPELL-P	NDIR	'Intelligent' microprocessor based NDIR sensor for Hydrocarbons or Carbon Dioxide. D 20 mm or 32 mm, 3 pin full pellistor output (on request 5 pin for RX/TX).
IRNEX-P	NDIR	'Intelligent' microprocessor based NDIR sensor for Hydrocarbons or Carbon Dioxide. D 20 mm, 3 pin output standard (on request 5 pin for RX/TX). ATEX explosion proof component approved, IEC Ex certification pending.
IRPEX-P	NDIR	'Intelligent' microprocessor based NDIR sensor for Hydrocarbons or Carbon Dioxide. D 20 mm, 3 pin full pellistor output (on request 5 pin for RX/TX). ATEX explosion proof component approved, IEC Ex certification pending.
IRIS-P	NDIR	'Intelligent' microprocessor based NDIR sensor for Hydrocarbons or Carbon Dioxide. D 32 mm, 3 pin output standard (on request 5 pin for RX/TX). Intrinsically safe ATEX certified.
IRIS-7	NDIR	'Dummy' version NDIR sensor for Hydrocarbons or Carbon Dioxide. D 20 mm or 32 mm, 7 pin raw signal output. Intrinsically safe ATEX certified.
NDIR sensor series	NDIR	How to compose the part number for all IR sensors
NETC heads – full conformity ATEX approved
IRAD	Sensor head	Full conformity ATEX explosion proof certified head in stainless steel or aluminium, housing NDIR sensor.
NETC2	Sensor head	Full conformity ATEX explosion proof certified head in stainless steel or aluminium, housing pellistor, NDIR or electrochemical cell sensor.
NETC3	Sensor head	Full conformity ATEX explosion proof certified head in stainless steel or aluminium, housing pellistor, NDIR or electrochemical cell sensor and possibly also PCB boards for signal transmission. The head is made in two parts and the sensor can be replaced.
NET heads – component ATEX approved
NET2	Sensor head	ATEX explosion proof certified head component in stainless steel or aluminium, housing pellistor, NDIR or electrochemical cell sensor.
NET3	Sensor head	ATEX explosion proof certified head component in stainless steel or aluminium, housing pellistor, NDIR or electrochemical cell sensor and possibly also PCB boards for signal transmission. The head is made in two parts and the sensor can be replaced.
Genius
Genius	NDIR	Genius sensor family - dual technology sensors
Catalytic sensors by Nemototech
NP-30	Catalytic	General purpose matched pair pellistor for fixed Systems with poison resistance and excellent stability. 2.0 V, 300 mA.
NP-30S	Catalytic	Lower cost version of NP-30H, mounted on single header. 2.0 V, 300 mA.
NP-17	Catalytic	Lower power matched pair pellistor for fixed systems, with poison resistance and excellent stability. 2.0 V, 175 mA.
NP-17SH	Catalytic	Low cost version of NP-17, mounted on single header. 2.0 V, 175 mA.
NP-18	Catalytic	General purpose matched pair pellistor for fixed systems with poison resistance and excellent stability. 2.5 V, 170 mA.
NP-18S	Catalytic	Lower cost version of NP-18, mounted on single header. 2.5V, 170 mA.
NP-AHS	Catalytic	Special Purpose pellistor sensor designed to monitor low LEL levels of Hydrogen. Poison resistant. Single header. High temperature version. 1.6 V, 140 mA.
NP-ANS	Catalytic	Special Purpose pellistor sensor designed to monitor low LEL levels of Ammonia. Poison resistant. Single header. High temperature version. 2.2 V, 175 mA.
NP-AC	Catalytic	Special Purpose pellistor sensor designed to monitor LEL levels of Acetylene. Poison resistant. Supplied as matched pairs, mounted on twin TO4 size headers. 2.0 V, 150 mA.
Catalytic sensors by N.E.T.
NP-17SHM	Catalytic	Lower cost version of NP-17, mounted on single header, Standard size D 20.4mm X H 10.0mm. 2.0 V, 175 mA.
NP-17SS(380)	Catalytic	The NP-17SS and NP-380 are (pellistor) type flammable gas sensor supplied as a matched pair of pellistor elements mounted on a phenolic base single header.
NP-30(21T)	Catalytic	The NP-30(21T) is a catalytic (pellistor) type flammable gas sensor supplied as a matched pair of elements mounted on TO4 size headers and protected by a metal can.
NP-17SM	Catalytic	The NP-17SM is a catalytic (pellistor) type flammable gas sensor supplied as a matched pair of pellistor elements mounted on a single header, protected by a miniature stainless steel enclosure and a phenolic resin base.
ATEX certified mini heads by N.E.T.
NET-4-10S	Catalytic	ATEX Certified miniature plug-in sensor block including NP-10S gas sensor. 4.25 V, 55 mA.
NET-4-13S	Catalytic	ATEX Certified miniature plug-in sensor block including NP-13S gas sensor. 3.0 V, 75 mA.
NET-5-10S	Catalytic	ATEX Certified miniature plug-in block including NP-10S gas sensor - Industry standard (16.5mm X 20mm) size. 4.25 V, 55 mA.
NET-5-13S	Catalytic	ATEX Certified miniature plug-in block including NP-13S gas sensor - Industry standard (16.5mm X 20mm) size. 3.0 V, 75 mA.
Electrochemical cells by Nemototech
NT-CO	E.C.	Standard Format Electrochemical Carbon Monoxide sensor. Range 0-1000 ppm. Output 75 nA/ppm.
NT-H2S-1	E.C.	Standard Format Electrochemical Hydrogen Sulfide sensor. Range 0-100 ppm. Output 700 nA/ppm.
NT-NO2	E.C.	Standard Format Electrochemical Nitrogen Dioxide sensor. Range 0-20 ppm. Output 600 nA/ppm.
NT-CL2	E.C.	Standard Format Electrochemical Chlorine sensor. Range 0-10 ppm. Output 600 nA/ppm.
NT-NO	E.C.	Standard Format Electrochemical Nitrogen Oxide Sensor. Range 0-250 ppm. Output 400 nA/ppm.
Electrochemical cells by N.E.T.
NT-CO-S4	E.C.	Electrochemical Carbon Monoxide sensor, D 20 mm. Range 0-500 ppm. Output 70 nA/ppm.
NT-O2-A2	E.C.	Electrochemical Oxygen sensor, D 20 mm. Range 0-25% vol. Output 80 to 120 µA @ 20.9% O2.
Electrochemical cells by N.E.T. premium line
NT-CO-PL1000	E.C.	Premium Line Electrochemical Carbon Monoxide sensor. Standard format. Range 0-1000 ppm. Output 70 nA/ppm.
NT-NH3-PL100	E.C.	Premium Line Electrochemical Ammonia sensor. Standard format. Range 0-100 ppm. Output 40 nA/ppm.
NT-NO2-PL30	E.C.	Premium Line Electrochemical Nitrogen Dioxide sensor. Standard Format. Range 0-20 ppm. Output 600 nA/ppm.
NT-H2S-PL100	E.C.	Premium Line Electrochemical Hydrogen Sulfide sensor. Standard format. Range 0-100 ppm. Output 700 nA/ppm.
NT-NH3-PL1000	E.C.	Premium Line Electrochemical Ammonia sensor. Standard format. Range 0-1000 ppm. Output 8 nA/ppm.
Solid electrochemical cells by N.E.T.
NT-CO-SS	Solid E.C.	Solid electrochemical carbon monoxide sensor, D 20 mm. Range 0-1000 ppm.
NT-H2S-SS	Solid E.C.	Solid electrochemical hydrogen sulfide sensor, D 20 mm. Range 0-100 ppm.
NT-O2-SS	Solid E.C.	Solid electrochemical oxygen sensor, D 20 mm. Range 0-25% vol.
NT-H2-SS	Solid E.C.	Solid electrochemical hydrogen sensor, D 20 mm. Range 0-100 %LEL.
Smart gas sensor modules for OEM manufacturers
REMORA-CO	Transmitter module	Double board module featuring voltage and I2C outputs
REMORA L	Transmitter module	Single board module featuring digital and analogue output for residential and fire detectors
CYBER TTL	Transmitter module	Single board module featuring voltage and digital (TTL) outputs
CYBER TX	Transmitter module	Multi board module featuring 4-20 mA and digital (RS485 MODBUS) outputs
Gas sensors for non hazardous areas (hydrogen, car parks, buildings and residential applications)
NET-656	Catalytic	Low cost catalytic flammable gas sensor, optimised for Detecting LNG and LPG. Metal enclosure, for residential gas detectors.
NT-CO-LI	E.C.	As NT-CO but slightly lower specification with lower cost. Developed especially for light industrial applications and car parks detection. Range 0-1000 ppm. Output 50 nA/ppm.
NT-H2S-LI	E.C.	As NT-H2S-1 but with slightly lower specification and lower cost. Developped especially for light industrial applications. Range 0-100 ppm. Output 500 nA/ppm.
NT-NO2-PK	E.C.	As NT-NO2 but slightly lower specification with lower cost. Developed especially for car parks detection. Range 0-30 ppm. Output 600 nA/ppm.
NT-CO-SLI	E.C.	As NT-CO but slightly lower specification with lower cost. Developed especially for light industrial applications and car parks detection. Range 0-1000 ppm. Output 50 nA/ppm.
NT-CO-S9	E.C.	New low profile (D 14.5 mm x H8.3 mm) CO sensor developped especially for light industrial applications and car parks detection.
NT-CO-SR	Solid E.C.	Solid Electrochemical Carbon Monoxide sensor for residential and car parks applications. Round slim format. Range 0-1000 ppm. Output 10-50 nA/ppm.
NT-CO-SF	Solid E.C.	Solid Electrochemical Carbon Monoxide sensor for residential and car parks applications. Flat format. Range 0-1000 ppm. Output 10-50 nA/ppm.
NT-H2-SR	Solid E.C.	Solid Electrochemical Hydrogen sensor for residential and car parks applications. Round format. Range 0-50 %LEL. Output 0.4-10 nA/ppm.
NT-H2-SF	Solid E.C.	Solid Electrochemical Hydrogen sensor for residential and car parks applications. Flat format. Range 0-50 %LEL. Output 0.4-10 nA/ppm.
RE-SAF-CO	Solid E.C.	REMORA CO, solid electrochemical CO sensor with integrated SAFE® circuit.
NT-NO2-SF	Solid E.C.	Solid Electrochemical Nitric Dioxide sensor for residential and car parks applications. Flat format. Range 0-100 ppm. Output 0-30 nA/ppm.
NT-NO2-SR	Solid E.C.	Solid Electrochemical Nitric Dioxide sensor for residential and car parks applications. Round slim format. Range 0-100 ppm. Output 10-30 nA/ppm.
RE-SAF-NO2	Solid E.C.	REMORA NO2, solid electrochemical NO2 sensor with integrated SAFE® circuit.
Accessories
NET-CKD	Accessories	Portable Digital Controller for Calibration of All Cyber devices
IR-P-KIT-DEMO	Accessories	IR sensor evaluation board
CYBER-KIT-DEMO	Accessories	CYBER modules evaluation board
NET-GD2 - Dust Protection Adapter Type 2	Accessories	Combustible dust protection adapter for type 2 head
NET-GD3 - Dust Protection Adapter Type 3	Accessories	Combustible dust protection adapter for type 3 head
NET-CONE2 / NET-CONE3 - Collector Cone	Accessories	Spun Aluminium Collector cone to enhance performance with gas significantly lighter than air. Available for NET type 2 and type 3 head.
NET-CAP2 / NET-CAP3 - Calibration / Sampling Cap	Accessories	Stainless Steel screw-fit assembly for calibration or as a permanent sampling hood. Available for NET head type 2 and 3.

首页	公司简介	产品展台	开发生产	资料下载	技术支持	解决方案	展会消息
代理经销	集成电路	高频微波	消费电子	工控网络	安防报警	光纤光电	汽车电子
合作交流	留言本	友情连接	热卖产品	销售网络	招聘加盟	新品介绍	联系我们