Overview
							msystems' mSSD SATA 2.5" (formerly Fast 
							Flash Disk (FFD) 2.5" Serial ATA) Flash Disk is a 
							state-of-the-art solid-state disk, based on NAND 
							flash technology, that provides the functionality of 
							a hard disk with no moving parts. mSSD SATA 2.5” 
							Flash Disk is an ideal, reliable storage solution 
							for telecommunication and blade servers industry 
							that must support 99.999% availability and comply 
							with NEBS Level 3. 
							mSSD SATA 2.5” Flash Disk delivers outstanding 
							reliability and enhanced endurance thanks to 
							msystems' TrueFFS technology, which applies dynamic 
							wear-leveling and bad block management. Due to its 
							unique design, mSSD SATA 2.5” Flash Disk provides 
							high-performance sustained read and write rates up 
							to 150MB/s and supports Serial ATA 1.0a standard.
							mSSD SATA 2.5” Flash Disk is fully compatible 
							with the SATA 1.0a interface, and has the same 
							mechanical dimensions and mounting holes of 
							traditional mechanical disks. It is a true drop-in 
							replacement for rotating 2.5" Serial ATA (SATA) and 
							Serial Attached SCSI (SAS) disks with highest 
							reliability and operating MTBF hours. 
							msystems' mSSD family has been providing rugged, 
							mass storage solutions to an expansive range of 
							industries since 1997. In air force, navy and army 
							installations, it has been field-tested inside data 
							recorders, moving maps, sonar, radar, fire control 
							systems, black boxes, data acquisition systems, 
							C4ISR, telecommunications, rugged laptops, tablet 
							PCs and servers. 
							
							Specifications
							Capacity
							Unformatted (GBytes): 1, 2, 4, 8, 12, 16, 
							24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 
							120, 128
							Compatibility
							Serial ATA: High-speed serialized AT 
							attachment, revision1.0a, Serial ATA working group
							Performance
							Burst Read/Write:  150 MBytes/sec (1.5 
							Gbits/sec)
							Sustained Read:    44 MBytes/sec
							Sustained Write:   40 MBytes/sec
							Access time:   <0.04 ms
							Physical
							Form factor: 2.5"
							Case dimensions (mm): 100.2(L) X 69.85(W) X 9.5 to 
							22.5(H)
							Weight: 0.1 Kg for 16GB; 0.22 Kg for 128GB
							Environmental
							Operating temperature
							  Commercial: 0°C to +70°C
							  Enhanced: -25°C to +75°C
							  Extended: -40°C to +85°C
							Storage temperature: -55°C to +95°C
							Humidity: 5% to 95% relative, non-condensing
							Operating altitude: Up to 80,000 feet
							Operating shock: 1,500G, MIL-STD-810F
							Operating vibration:16.3G RMS (random, 10Hz to 
							2000Hz;3 vibration axes), MIL-STD-810F
							Power
							Input voltage: 5VDC (+/- 5%)
							Typical power consumption:
							                                  16GB      128GB
							Idle                             1.8 W     2.2 W
							Sustained read/write     2.3 W     2.9 W
							Sanitize                       2.4 W     6.2 W
							Reliability
							MTBF:  1,180,777operating hours MTBF for 
							16GB based on Telcordia SR-332, GB, 25°C
							EDC/ECC: Embedded EDC/ECC, based on BCH Algorithm
							BER (Bit Error Rate) <10-20
							Reliability features
							  Built-in power-up self-test (BIT)
							  Manual and automatic self-diagnostics
							  TrueFFS bad block management
							  Data integrity under power-cycling
							  SMART (Self-Monitoring, Analysis and Reporting 
							Technology) remote monitoring
							Endurance
							Unlimited read cycles 
							>5,000,000 Write/Erase cycles 
							TrueFFS dynamic wear-leveling
							Garbage collection process
							>10 years data retention
							User Interface & Configuration
							Interface:              SATA 1.5 Gbits/sec
							Firmware upgrade: Field upgrade capability
							Format:                 Factory low-level format
							Drivers:                 None required
							Power LED:            Green
							Access LED:           Red
							Enhanced Security Erase
							Entire disk security erase in seconds
							Partial security erase
							Auto-resume security erase/sanitize on power 
							interrupt
							Sanitize complies with NISPOM DoD 5220.22-M, NSA 
							130-2, Air Force AFSSI 5020, Army 380-19, Navy NAVSO 
							P-5239-26 and IREC (IRIG) 106 NTISSP-9
							Secure erase/sanitize software interrupt, hardware 
							interrupt optional
							RoHS Compliant  
							The product is available in RoHS (Pb-free) and Pb 
							(Leaded) versions.  
              
							
							Compliance
							CE, UL, EN 55022 Class B, CISPR 22 Class B, 
							AS/NZS 3548 Class B, BSMI CNS 13438 Class B, 
							CAN/CSA-V-3/2001.04 (VCCI), FCC Part 15 Class B, EN 
							61000-3-2, EN 61000-3-3, IEC 61000-4-2/3/4/5/6/8/11, 
							MIL-STD-810F
							Customization
							PCB conformal coating
							Faster read/write rates
							Made in the USA
							Supports FMF requirements
							Warranty
							5 years (longer warranty period can be supported)
							Ordering Information
							FFD-25-SATA-CCC-T-H
							CCC - Unformatted capacity (GB): 1, 2, 4, 
							8, 12, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 
							104, 112, 120, 128 
							T:Operating temperature range
							  Blank - Commercial:  0°C to +70°C
							  N - Enhanced:         -25°C to +75°C
							  X - Extended:          -40°C to +85°C
							H:Case Height
							  A - 9.5mm up to 16GB
							  B - 14.5mm up to 64GB
							  C - 18.5 mm up to 112GB
							  D - 22.5 mm up to 128GB
							P:RoHS Compatibility
							  Blank - Non RoHS version 
							  P -       RoHS version