|  | 
					
						| 
							
								|  |  
								|   | 
									产品规格 | .Capacitance sensor input channels—14ch .SPI®-compatible serial interface—(AD7142)
 .I2C®-compatible serial interface—(AD7142-1)
 .Package type—32-lead, 5 mm x 5 mm LFCSP_VQ
 .Supply voltage—2.6 V to 3.6 V
 .Full power mode:—1mA
 .Low power mode:—50uA
 .Resolution—16Bit
 .Frequency—240KHz
 .ESD Rating (Human Body Model)—2.5 kV
 .Operating Temperature Range—−40°C to +150°C
 |  
								| 
									产品特性 | .Automatic 
								compensation for environmental changes .On-chip RAM to store calibration data
 .Interrupt output and GPIO
 .Automatic adaptive threshold and sensitivity 
								levels
 |  
								| 
									产品应用 | MP3/MFP/Mobile 
								phone/Car TV/DSC |  
								| 
									文字介绍 | AD7142将ADI公司获奖的CDC产品种类扩充到消费性应用,它具有超过同类解决方案的显著优势,包括提高抗环境干扰能力。这些干扰来自环境温度和湿度,他们会降低其他电容器传感器的性能。该组件的功耗比同类解决方案低50%,因而使其适合电池供电的应用。AD7142有14个输入端,可对各种传感器配置进行设置,例如触控滚动条、8路位置传感器,以及驱动弹出选单的滚轮,因而使用户可以更方便地浏览大量的音乐、图片和视讯档案。 
 「蜂巢式手机和MP3播放器的使用接口是最困难的设计环节之一,因为它要求在现代触摸屏设计最小尺寸和最低功耗范围内具有最高的精密度和功能,用于MFP产业和汽车应用的CDC产品一样,AD7142能以较低的成本提供强韧性和无差错的性能,同时比以前的产品提供更大的设计自由度。」
 
 AD7142凭借ADI公司的电容器感应技术具有高度可程序能力,并包含自适应阈值和灵敏度算法,允许芯片调整用户的手指尺寸,因而使该传感器对手指粗细不同的用户都适用。这款16位、低噪声、高精密度CDC允许终端用户调整单个传感器的敏感程度以适应他们的手指和触控方式。AD7142透过片内数字校准功能实现独特的自动环境补偿,因而不论在任何时间和任何环境条件都能保证传感器的性能无差错。由于该组件显而易见地对用户提供了这种连续的校准,所以在外部传感器上不会产生误触控或者无效触控。
 
 另外,AD7142的低功耗特色使其很适合电池供电的应用,包括数字相机、电视遥控器和游戏机及可携式多媒体播放器。全功率方式工作电流小于1.0mA,而待机方式工作电流小于2.0uA。该组件还能够灵活地调整输出速率以获得最优化的功耗。AD7142提供SPI或者I2C兼容接口选择,与ADI公司用于手机和个人媒体播放器的Blackfin处理器可以很好地配合运作。
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | .Differential Phase—0.1 degrees .Differential Gain—0.25%
 .Power Down Current—0.1uA
 .Power Consumption—1.85mA
 .Supply Voltage—2.5V ~ 6V
 .Input Bias Current—0.5uA
 .Operating Temperature Range—-40℃ ~ +125℃
 .Package—SC70
 |  
								| 
									产品特性 | .Rail to Rail 
								Output .Support Desable Function
 |  
								| 
									产品应用 | 影像输出/入系统 |  
								| 
									文字介绍 | ADA4430-1 
								内建六阶低通滤波器可提供精准的频率输出并支持Disable输出的功能,可有效简化传统由L-C组成的滤波器设计. |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | .Differential Phase—0.6 degrees .Differential Gain—0.5%
 .Resolution (Each ADC)—10bit
 .Analog Front-End Crosstalk—60dB
 .Horizontal Lock Range—±5%
 .Vertical Lock Range—40~70Hz
 .Fsc Subcarrier Lock Range—±1.3KHz
 .Vertical Lock Timw—2 fields
 .Autodetection Switch Speed—100 line
 .CVBS Analog Supply Current—33 mA
 .S-Video Analog Supply Current—59 mA
 .Y/Cb/Cr Analog Supply Current—77 mA
 .Total Power Dissipation in Power-Down Mode—15 
								uW
 |  
								| 
									产品特性 | .支持3/6信道模拟讯号输入 .支持NTSC/PAL/SECAM影像规格自动侦测
 .CVBS/S-Video/ Y/Cb/Cr 影像格式输入
 .CTI/DNR 影像强化调整
 .5线式梳型虑波器
 .一组超高速10bit ADC
 |  
								| 
									产品应用 | 车用电视/个人多媒体播放器/影像监视系统 |  
								| 
									文字介绍 | ADV7180是ADI首次发表的低价格但提供高质量影像输出的影像译码器.ADV7180在输入的前端提供了阶梯状滤波器研发者不须外加滤波器.ADV7180亦提供了DNR/CTI的影像强化输出调整,ADLLT更独步全球提供研发者在弱讯号的处理强而有力的支持.ADV7180内建智能型的图像处理器让ADV7180在控制上更简化,只须设定少数的缓存器就可输出高质量影像,改写影像译码器繁琐复杂的设定程序. |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | .DAC分辨率—11bit .DAC数—3
 .DAC速度—297MHz
 .输入模式—CCIR 656 8bit
 .输入模式—CCIR 601 16bit
 .输入模式—DDR 8bit
 .输入模式—R/G/B 565
 .输出格式—CVBS
 .输出格式—S-Video
 .输出格式—Y/Pb/Pr
 |  
								| 
									产品特性 | .工作电压—1.8~3.3V .工作温度—-40℃~+85℃
 .包装—LCSP
 |  
								| 
									产品应用 | CAR TV/GPS |  
								| 
									文字介绍 | ADV7393为ADI首颗低成本高画质输出的SD/HDTV影像编码器.不仅支持各种格式输入,输出更可支持到1080i 
								60Hz/1080p 30Hz.控制方式为I2C.ADV7393更率先支持Cable 
								Detection,当DAC侦测到使用者没有连接Cable时,自动将DAC电源关闭以节省电力并提高可携式产品的电池的使用时间. |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | ANX7150完全支持HDMI 
								1.3版本,向后兼容DVI1.1标准并支持HDCP1.1内容保护。该芯片以通过HDMI和HDCP认证测试,ADTC-EasyHD实验室的互联互通测试。 |  
								| 
									产品特性 | ANX7150使用了突破性的专利设计,使得本款芯片能够回收HDMI连接中浪费掉的能量,并重新利用,来满足芯片应用所需功耗,电力需求减少至接近零, 
								。与市面现有产品比较,ANX7150减少电池电量的消耗高达95%以上。 |  
								| 
									产品应用 |  |  
								| 
									文字介绍 | 将ANX7150使用在便携设备中,制造商可以在不牺牲电池使用寿命的同时为终端用户带来惊人的高清音视频效果。ANX7150已广泛应用于MP4设备、多媒体手机、数码相机、数码摄像机等众多便携设备上。 
 ANX7150被设计为促进移动高清视频革命。随着消费者不断地将更多的高质量视频内容存储到移动设备上,他们将积极寻找简单、低功耗的解决方案以在更大的高分辨率显示器上播放视频。此产品还整合了先进的数字音频,为Dolby数字和DVD音频提供8通道I2S支持。它还为PCM、Dolby数字和DTS环绕声格式和数字音频传输提供S/PDIF协议支持。其音频接口允许可编程的I2S通道映射。
 
 ANX7150带有软件控制的电源管理功能,其可提供的封装方式有48和64针QFN、80针TQFP和81针BGA。
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【ANPEC - 
										APA2030/2031 AUDIO AMP】 |  |  |  
								|   | 
									产品规格 | Stereo 2.6W Audio Amplifier (With Gain Control) |  
								| 
									产品特性 | · Low 
								Operating Current with 6mA · Improved Depop Circuitry to Eliminate Turn-On 
								Transients in Outputs
 · HighPSRR
 · Internal Gain Control, Eliminate External 
								Components
 · 2.6W per Channel Output Power into 3W Load at 
								5V, BTL Mode
 · Multiple Input Modes Allowable Selected by 
								HP/LINE Pin (APA2030)
 · Two Output Modes Allowable with BTL and SE 
								Modes Selected by SE/BTL Pin (for APA2030 only)
 · Low Current Consumption in Shutdown Mode(50mA)
 · Short Circuit Protection
 · TSSOP-24P (APA2030) and TSSOP-20P (APA2031) 
								with Thermal Pad Packages.
 · Lead Free and Green Devices Available(RoHS 
								Compliant)
 |  
								| 
									产品应用 | · Notebook PCs · LCD Monitor
 |  
								| 
									文字介绍 | APA2030/1 is a 
								monolithic integrated circuit, which provides 
								internal gain control, and a stereo bridged 
								audio power amplifiers capable of producing 2.6W 
								(1.9W) into 3W with less than 10% (1.0%) THD+N. 
								By controlling the two gain setting pins, Gain0 
								and Gain1, the amplifier can provide 6dB, 10dB, 
								15.6dB, and 21.6dB gain settings. The advantage 
								of internal gain setting can be less components 
								and PCB area. Both of the depop circuitry and 
								the thermal shutdown protection circuitry are 
								integrated in APA2030/1, that reduces pops and 
								clicks noise during power up or shutdown mode 
								operation. It also improves the power off pop 
								noise and protects the chip from being destroyed 
								by over temperature and short current failure. To simplify the audio system design, APA2030 
								combines a stereo bridge-tied loads (BTL) mode 
								for speaker drive and a stereo single-end (SE) 
								mode for headphone drive into a single chip, 
								where both modes are easily switched by the 
								SE/BTL input control pin signal. In addition, 
								the multiple input selections are used for 
								portable audio system. The APA2031 eliminates 
								both input selection and single-end (SE) mode 
								function to simplify the design and save the PCB 
								space.
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【ANPEC - 
										APA2068 AUDIO AMP】 |  |  |  
								|   | 
									产品规格 | Stereo 2.6W Audio Power Amplifier (With 
								DC_Volume Control) |  
								| 
									产品特性 | · Low 
								Operating Current with 9mA · Improved Depop Circuitry to Eliminate Turn-on 
								and Turn-off Transients in Outputs
 · High PSRR
 · 32 Steps Volume Adjustable by DC Voltage with 
								Hysteresis
 · 2.6W per Channel Output Power into 4W Load at 
								5V, BTL Mode
 · Two Output Modes Allowable with BTL and SE 
								Modes Selected by SE/BTL pin
 · Low Current Consumption in Shutdown Mode(1mA)
 · Short-Circuit Protection
 · Thermal Shutdown Protection and Over-Current 
								Protection Circuitry
 · Maximum Output Swing Clamping Function
 · The OUT+ Signal and the IN- Signal are 
								Outphase
 · SOP-16P Packages with Thermal Pad Package
 · Lead Free and Green Devices Available(RoHS 
								Compliant)
 |  
								| 
									产品应用 | · NBs · LCD Monitor or TVs
 |  
								| 
									文字介绍 | APA2068 is a 
								monolithic integrated circuit, which provides 
								precise DC volume control, and a stereo bridged 
								audio power amplifiers capable of producing 2.6W 
								(1.8W) into 4W with less than 10% (1.0%) THD+N. 
								The attenuator range of the volume control in 
								APA2068 is from 20dB (DC_Vol=0V) to -80dB 
								(DC_Vol=3.54V) with 32 steps. The advantage of 
								internal gain setting can be less components and 
								PCB area. Both of the depop circuitry and the thermal shutdown protection circuitry are 
								integrated in APA2068, that reduce pops and 
								clicks noise during power up or shutdown mode 
								operation. It also improves the power off pop 
								noise and protects the chip from being destroyed 
								by over temperature and short current failure.
 To simplify the audio system design, APA2068 
								combines a stereo bridge-tied loads (BTL) mode 
								for speaker drive and a stereo single-end (SE) 
								mode for headphone drive into a single chip, 
								where both modes are easily switched by the 
								SE/BTL input control pin signal.
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【ANPEC - 
										APA2600 AUDIO AMP】 |  |  |  
								|   | 
									产品规格 | 2.8W Stereo Class-D Audio Amplifier |  
								| 
									产品特性 | · Operating 
								Voltage: 2.4V~5.5V · Filter-free Class-D Amplifier
 · High Efficiency 87% at PO=1.5W, 8W Speaker, 
								VDD=5V
 · Fast Startup Time (20ms)
 · High PSRR: 70dB at 217Hz
 · Thermal and Over-Current Proections
 · Two Gain-Setting Selectable : 6dB and 12dB
 · Less External Components Required
 · Space Saving Package– TQFN3x3-16
 · Lead Free Available (RoHS Compliant)
 |  
								| 
									产品应用 | · Handsets · PDAs
 · Portable multimedia devices
 · Notebooks
 |  
								| 
									文字介绍 | The APA2600 is 
								a stereo, high efficiency, filter-free Class-D 
								audio amplifier available in a TQFN3x3-16 pins 
								package. The internal gain setting can minimize the 
								external component count and save the PCB space. 
								For the flexible application, the gain can be 
								set to 6dB or 12dB by GAIN control pin. High 
								PSRR and differential architecture provide 
								increase immunity to noise and RF rectification. 
								In addition to these features, short startup 
								time and small package size make the APA2600 is 
								an ideal choice for cellular handsets, PDA, and 
								notebook PCs.
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【ATLAB - 
										ATLab Digital Capacitive Sensor (DPI7 
										family)】 |  |  |  
								|   | 
									产品规格 | >Extremely low power consumption (under 50μA in 
								active mode/20uA in idle mode) >Support wide AIC™dynamic range. (~70pF)
 >Pulse Pass TDM architecture
 >Supports 8 channels touch sensor and 4~8 
								channels open drain type touch outputs.
 >Support 1 channel is pu
 |  
								| 
									产品特性 | >High 
								Sensitivity 30 fF/step now (x 5 than others), break 1 
								fFbarrier soon.
 Small sensing area Better resolution
 Extend to another applications (e.g. proximity 
								sensing, display embedded touch screen)
 >Digital Advantages
 Following Moore’s Law / Insens
 |  
								| 
									产品应用 | .Mobile Phone 
								and other Handheld Devices .Portable Media Players(MP3,Video/Photo)
 .Digital Still and Video Cameras
 .LCD Monitor and Flat-Panel Display Controls
 .Keyboards and Mice
 .Remote Controls
 .GPS Navigation Systems
 |  
								| 
									文字介绍 | Since 2005 
								ATLab released new touch sensor device of DPI7 
								family to market. DPI7 family achieved lower 
								power consumption in IDLE power saving mode as 
								low as 70% of its predecessor and added a self 
								recovery mechanism against a failure due to an 
								electrical |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | 3*3*0.9mm |  
								| 
									产品特性 | 3D加速度传感器 |  
								| 
									产品应用 | Mp3 / Mp4 / 
								PMP / 手机 / 计步器 / 游戏手柄 |  
								| 
									文字介绍 | 对比BMA020C, 
								BMA150除了在封装尺寸和电器性能上延续了BOSCH G-sensor产品的优势, 
								在精度上表现更为出色! 除了能实现BMA220的基本应用以外, 
								还可以配合BOSCH提供的精确算法, 实现计步器功能, 
								可以选择不同的运动模式,侦测用户每天运动状况.目前在Apple-Ipod 
								Nano产品上也根据G-sensor的特性, 增加了记步健身功能. |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | 2*2*0.9mm |  
								| 
									产品特性 | 3D加速度传感器 |  
								| 
									产品应用 | Mp3 / Mp4 / 手机 
								/ PMP |  
								| 
									文字介绍 | 德国Bosch(博世)三轴加速度传感器(G-sensor) 
								以其目前市面最小封装尺寸(2*2*0.9mm) 和 超低功耗(工作:200μA, 
								待机:1μA)的独特优势特别适合应用于手持产品. 
								根据侦测多媒体手持设备X.Y.Z三轴的参数变化,实现以下功能: ‧Mp4横竖屏切换,
 ‧双敲击播放/暂停,
 ‧甩动前后换歌/待机画面等.
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | USB Speadkers-on-a-Chip with Hardware Acoustic 
								Echo Cancellation DSP. 48Pin QFN
 |  
								| 
									产品特性 | 1. Wideband 
								Acoustic Echo Cancellation DSP engine exceeding 
								TIA 920 requirement. 2. Integrated 1.2W Class-D amplifier,higher 
								output reference design available.
 3. 24-bit DAC/ 16-bit ADC.
 4. USB 2.0 full speed compliant.
 5. Auxiliary line in input with jack sense.
 6. Music-On-Hold.
 7. Aux Fade-in/Fade-out.
 8. DSP Array Microphone.
 9. USB bus powered or external powered option.
 |  
								| 
									产品应用 | . All-in-One 
								PC speakers,MP3 player dock,speakerphone. 
 . USB VoIP speakerphone.
 . LCD monitor with built-in speakers and 
								speakerphone.
 . Notebook PC docking station.
 . Embedded USB audio application.
 |  
								| 
									文字介绍 | 单芯片:CX20562 
								整合了数字影音处理器、音讯编码器以及 Class-D 放大器等功能. 主要功能包括卓越音质表现的先进声音处理、回音消除以及杂音抑制等.
 此单芯片解决方案整合通用总线 USB 接口,能够让制造商开发出兼容于 PC 与 Mac 
								的随插即用式产品,并拥有可以与各种音讯外围连接的附属模拟音源输入功能。
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | ‧超小封装尺寸的SMD (3.2 × 2.5 × 0.7mm) ‧频率范围宽12MHZ-60MHZ
 ‧超小封装尺寸的SMD (3.2 × 2.5 × 0.7mm)
 |  
								| 
									产品特性 | ‧非常通用的全系列AT型晶体单元。 ‧小尺寸封装,高稳定性。
 |  
								| 
									产品应用 | ‧各种IC匹配的时钟。 ‧手机,蓝牙,ISM,MCU时钟等
 ‧ECU匹配时钟。
 |  
								| 
									文字介绍 | 目前的电子产品越来越向小型化、便携式发展,这就要求元器件同样向小小型化发展,EPSON 
								正是走在器件小型化的前列,在小型化的同时保持了产品一贯的高精度,高稳定度,为您的设计提供便利。 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | ‧超小封装尺寸的SMD (3.2 × 1,5 × 0.8 mm) ‧标准时钟频率32.768KHZ.
 |  
								| 
									产品特性 | ‧采用QMEMS工艺具有优越的一致性和稳定性。 |  
								| 
									产品应用 | ‧小型便携式通讯设备和电子设备 |  
								| 
									文字介绍 | EPSON专注于小尺寸,高精度,高稳定度的32.768K晶体,主要应用于时钟、小型便携式通讯设备和电子设备,比如超薄手机,应为其厚度只有0.8mm,所以特别适用于对体积要求严格的电子产品。 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | ‧超小封装尺寸的SMD (5 × 3.2 × 1.3 mm) ‧VDD=3.0V+-0.3V
 |  
								| 
									产品特性 | ‧通过采用真空密封实现优异的耐环境特性 ‧利用振动晶体的高度稳定性
 ‧睡眠模式下的剪辑启动时间和低功率消耗
 |  
								| 
									产品应用 | ‧ 
								便携多媒体播放器图像稳定性检测 ‧人机接口的运动检测
 |  
								| 
									文字介绍 | 照相机的防抖补正是通过防抖,即测试出人的动作来进行补正的。人的动作是以腕关节为中心的旋转运动为主体的。为了测试这个旋转运动,检测角速度就是角速度传感器的重要使命。通过检测角速度,就能正确地测试出耕种各样的动作。EPSON 
								Toyocom的角速度传感器以水晶为材料,实现了小型化并达到了高度的稳定性,为此被数码相机所采用。同时也大量应用于例如导航系统或者游戏等需要检测人或者物体动作的商品。 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Infineon - ESD0P2RF-02LRH】 |  |  |  
								|   | 
									产品规格 | ESD / transient protection of RF signal lines 
								according to: IEC61000-4-2 (ESD): ±20kV (contact)
 IEC61000-4-4 (EFT): 40 A (5 / 50 ns)
 IEC61000-4-5 (Surge): 3 A (8 / 20 μs)
 |  
								| 
									产品特性 | • Extremely 
								small form factor down to 0.62 x 0.32 x 0.31 mm³ • Very low dynamic resistance
 • Max. working voltage: ±5.3 V
 • Extremely low capacitance: 0.2 pF typ.
 • Very low reverse current < 1 nA typ.
 • Very low series inductance down to 0.2 nH typ.
 • Pb-free (RoHS compliant) package
 • Qualified according AEC Q101
 |  
								| 
									产品应用 | • ESD 
								protection of sensitive RF signal lines • RF antenna protection, frontend module
 • GPS, mobile TV, FM radio, RKE, UWB
 |  
								| 
									文字介绍 | ESD0P2RF-02LRH 
								is the protection diode , Diode bi-direction, 
								Extremely low capacitance: 0.2 pF, Can 
								protection External ANT(DVB-T,FM….) input. |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Infineon - ESD5V0L1B-02V】 |  |  |  
								|   | 
									产品规格 | ESD / transient protection according to: IEC61000-4-2 (ESD): ± 25 KV (contact)
 IEC61000-4-4 (EFT): 40 A (5/50 ns)
 IEC61000-4-5 (surge): 2.5 A (8/20 μs)
 |  
								| 
									产品特性 | • Max. working 
								voltage: ± 5 V • Ultra low dynamic resistance: 0.3 Ω
 • Low capacitance: 8.5 pF typ
 • Very low reverse current: < 1 nA typ.
 • Pb-free (RoHS compliant) package SC-79
 • bi-directional
 • Qualified according AEC Q101
 |  
								| 
									产品应用 | • Cellular 
								handsets, portable devices, notebooks and computers
 • Digital cameras, power supplies
 and audio/ video equipment, accessories
 |  
								| 
									文字介绍 | ESD5V0L1B-02V 
								is the protection diode , Diode bi-direction & 
								Package size compatitable 0603 size. RD solder 
								to PCB easily. |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | ESD / transient protection of four I/O lines and one Vcc line exceeding:
 IEC61000-4-2 (ESD): ± 15 kV (contact)
 IEC61000-4-4 (EFT): 2.5 kV / 50 A (5/50 ns)
 IEC61000-4-5 (surge): 3 A (8/20 μs)
 |  
								| 
									产品特性 | • Reverse 
								working voltage data lines: 5.3 V max. • Reverse working voltage Vcc: 6 V max.
 • Very low capacitance: 0.4 pF typ.
 • Very low reverse current < 10 nA typ.
 • Very low clamping voltage
 • Pb-free (RoHS compliant) package SC74
 |  
								| 
									产品应用 | • USB 2.0 and 
								USB 3.0 ports • Ethernet port: 10/100/1000 Mb/s
 • IEEE 1394 FireWire ports
 • Mobile communications e.g. high-speed
 SIM card protection
 • Consumer products (STB, DVD, DSC, DVC...)
 • Notebooks and desktop computers, peripherals
 |  
								| 
									文字介绍 | The 
								ESD5V3U4RRU is a TVS diode array in a ultra low 
								Capacitance. The ESD5V3U4RRU, featuring a 
								typical capacitance of 0.4 pF and was designed 
								for digital high-speed applications operating at 
								voltages of up to 5.3 V,In USB 2.0 port is esay 
								use. |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Inpaq - 
										ACA-5036-A2-CC-S】 |  |  |  
								|   | 
									产品规格 | 2.4GHz ISM Band Chip Antenna L*W*T=5.2*3.7*0.7 mm
 |  
								| 
									产品特性 | ‧Center 
								Frequency(Mhz): 2450 ‧Bandwidth(MHz): 180 ‧ Peak Gain(dBi): 3 typ
 ‧Impedance(Ω): 50 typ.
 ‧Efficiency(%): 80 typ
 ‧Matching Circuit: Pi matching circuit
 ‧Test Condition: Measured on 80*40 mm Antenna 
								Evaluation Board.
 |  
								| 
									产品应用 | Bluetooth, 
								WLAN, Wi-Fi, ZigBee,802.11b/g |  
								| 
									文字介绍 | ‧High gain and 
								single band ‧Compact size and low profile
 ‧Omni-directional
 ‧SMD type
 ‧RoHS compliant
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | Power Inductor L*W*T=2.5*2.0*0.9 mm
 |  
								| 
									产品特性 | ‧Inductance(uH): 1.5 ‧Test Freq(MHz):1
 ‧S.R.F(MHz) Min.:50
 ‧Rated Current(mA):1500
 |  
								| 
									产品应用 | Suitable for 
								DVD, DSC, PND, PC, NB, Power Line. |  
								| 
									文字介绍 | ‧The 
								monolithic construction performs high 
								reliability and ensures a closed magnetic flux 
								in a component avoids magnetic leakage and 
								interference. ‧Allow for higher mounting density.
 ‧Low DC resistance
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | TVS(Transient Volitage Suppressor) SOT23-6L
 4 channels
 |  
								| 
									产品特性 | ‧Capactance(pF): 1 ‧Vrwm(Volts):5V
 ‧ Vb(Volts):6.2V
 ‧ ESD Air/Contact(KV max.):15/8
 |  
								| 
									产品应用 | ‧Low 
								Capacitance Product ‧Applications for High-Speed
 ‧Signal Lines sunch as HDMI,DVI,
 ‧USB,IEEE1394 Port etc.
 |  
								| 
									文字介绍 | ‧SMD type 
								silicon based chip. ‧Quick response time(<1ns).
 ‧Low leakage current and clamping voltage.
 ‧Low capacitance can meet high speed single 
								transient voltage protection
 ‧Small package to save board space
 ‧Solid-stage silicon-avalanche technology
 ‧ead free type
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【NEWPORT - NM310 (DVB-T/H Dual Mode) / 
										NM305 (DVB-T)】 |  |  |  
								|   | 
									产品规格 | NMI310: DVB-H/T RF Tuner+Demodulator SOC NMI305: DVB-T RF Tuner+Demodulator SOC
 0.13um CMOS
 VHF, UHF and L Band multi-band support
 Ultra low power consumption: 20mW in DVB-H mode 
								and 200mW in DVB-T mode
 8mm x 8mm BGA package
 Support SPI, SDIO, TS, EBI and I2C Interfaces
 |  
								| 
									产品特性 | RF Tuner, 
								Baseband Demodulator and Memory integrated on a 
								single SOC die Fully MBRAI Compliant
 Supports DVB-T mode operation
 No external memory required
 Low Noise (3dB system NF)
 High Linearity (+2dBm IP3)
 110Hz Doppler (16QAM, 8K, Rate ½)
 |  
								| 
									产品应用 | Cellular Phone PND
 PMP/MP4
 Portable DVD Player
 Portable TV
 USB dongle
 NB
 DTV tuner module
 |  
								| 
									文字介绍 | NM310结合四频段、直接降频、DVB-H基频解调及所需内存等技术,灵敏度、频道切换及干扰抑制等性能较为突出。接收器可同时接收8个频道并维持在3.0dB的低杂音指数(Noise 
								Figure),因此可提供广泛的覆盖性。 另外在低功耗的设计上已达到20dBm,在系统线性度上最多可达到10dB。其它包括55dB的相邻信道选择性能力且在8K模式下有着较高的都卜勒(Doppler)性能。因为SoC的特性加上无需外部内存,Balun转换器及其它射频组件等特点,可降低材料成本。
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【NEWPORT - NMI320 (ISDB-T 1&3 Seg)】 |  |  |  
								|   | 
									产品规格 | ISDB-T 1 & 3 Segment Tuner + Demodulator SOC Supports UHF and VHF operation
 Power consumption below 72 mW
 7mm x 7mm BGA package
 Support SPI, SDIO, TS, EBI and I2C Interfaces
 |  
								| 
									产品特性 | RF Tuner, 
								Baseband Demodulator and Memory integrated on a 
								single SOC die Dual mode 1 segment and 3 segment operation
 Very low noise figure: 3.0 dB typical
 Up to +25dBm IIP3
 -110dm Sensitivity (QPSK)
 |  
								| 
									产品应用 | Cellular Phone PND
 PMP/MP4
 Portable DVD Player
 Portable TV
 USB dongle
 NB
 DTV tuner module
 |  
								| 
									文字介绍 | NM320的主要特点为具有高于120dB的动态增益范围,50dB的镜像抑制及大于55dB的相邻信道选择性能力。功率消耗为70mW、杂音指数(Noise 
								Figure) 3.0dB,及线性度(+20dBm 
								IP3),并包含双频段的接收能力,ISDB-T One & Three 
								Seg的解调能力及所有所需的内存,而且不需外接内存,Balun转换器及回路滤波器(Loop 
								Filter)。使能于较少的材料成本(BOM Cost)下,提供客户完整的解决方案。 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | Low VCEsat (BISS) transistor |  
								| 
									产品特性 | ‧Low 
								collector-emitter saturation voltage VCEsat ‧High collector current capability: IC and ICM
 |  
								| 
									产品应用 | ‧Power 
								management ‧Driver in low supply voltage applications
 ‧Inductive load driver
 |  
								| 
									文字介绍 | PBSS5350X: PNP 
								low VCEsat (BISS) 
								transistor/VCEO=50V/IC=3A/SOT89 PBSS4350X:NPN low VCEsat (BISS) 
								transistor/VCEO=50V/IC=3A/SOT89
 PBSS5350D:PNP low VCEsat (BISS) 
								transistor/VCEO=50V/IC=3A/SOT457
 PBSS5350Z:PNP low VCEsat (BISS) 
								transistor/VCEO=50V/IC=3A/SOT
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | 150 MHz pixel rate HDMI 1.3 transmitter with 3 × 
								8-bit video inputs, HDCP and CEC support |  
								| 
									产品特性 | ‧DVI 1.0 ‧HDMI 1.3a
 ‧EIA/CEA-861B
 ‧CEC (HDMI 1.3)
 ‧SimplayHD
 ‧HDCP 1.3
 |  
								| 
									产品应用 | ‧Digital Video 
								Camera (DVC) ‧Digital Still Camera (DSC)
 ‧Portable Multimedia Player (PMP)
 ‧Mobile Phone
 ‧Ultra-Mobile Personal Computer (UM PC)
 |  
								| 
									文字介绍 | TDA19989 is a 
								very low power and very small size 
								High-Definition Multimedia Interface (HDMI) v. 1.3a transmitter. It is backward 
								compatible DVI 1.0 and can be connected to any
 DVI 1.0 and HDMI sink.
 It allows mixing 3 × 8-bit RGB or YCbCr video 
								stream with a pixel rate up to 150 MHz
 together with one S/PDIF or one I2S-bus audio 
								streams with an audio sampling rate up to
 192 kHz.
 |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | Enhancement mode Field-Effect Transistor (FET) |  
								| 
									产品特性 | ‧Logic level 
								threshold compatible ‧Very fast switching
 ‧ESD protected, typical 3 KV HBM only 2N7002CK
 |  
								| 
									产品应用 | ‧Power 
								management ‧Logic level translator
 ‧High-speed line driver
 |  
								| 
									文字介绍 | 2N7002CK:N-MOS/VDS=60V/ID=300mA / SOT23 / ±3KV 
								ESD PMV65XP:P-MOS /VDS=60V/ID=300mA/ SOT23
 PMGD370XN:Dual N-MOS/VDS=30V/ID=740mA /SOT363
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【NXP - 
										PESD/IP series (ESD/EMI filter)】 |  |  |  
								|   | 
									产品规格 | ESD protection /EMI filter Solution |  
								| 
									产品特性 | ‧Low line 
								capacitance ‧According to IEC61000-4-2, level 4 standard
 ‧Ultra small Package for SOD882
 |  
								| 
									产品应用 | I/O ports and 
								Key pad ESD protection/EMI filter |  
								| 
									文字介绍 | IP4223CZ6/IP4284CZ10 forUSB2.0/3.0 ports ESD 
								protection Solution. PESD-series(SOD882) :Low capacitance ESD 
								protection diodes in SMD plastic
 packages designed to protect one data line from 
								ESD damage.
 IP425X-series:The IP425x family consists of 4-, 
								6- and 8-channel RC low-pass filter arrays which 
								are
 designed to provide filtering of undesired RF 
								signals on the I/O ports of portable
 communication or computing devices.
 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【SGMICRO - SGM803 / SGM809 / SGM810】 |  |  |  
								|   | 
									产品规格 | 1. 
								They provide a reset output suring power-up , 
								power-down and brownout conditions. 2. On power-up , an internal timer holds reset 
								asserted for 240ms.
 3. The RESER output remains operational with Vcc 
								as low as 1V.
 4.The SGM803/809 provide an active low reset 
								signal while the SGM810 provides an active high 
								signal output.
 5. Seven reset threshold voltage options are 
								available suitable for monitoring 2.5V, 3V, 3.3V 
								and 5V supply voltages.
 |  
								| 
									产品特性 | 1. Precision 
								Voltage Monitor:2.5V, 3V, 3.3V, 5V 2. Superior Upgrade for MAX803/MAX809/MAX810 and 
								ADM803/ADM809/ADM810
 3. Low power consumption(17uA TYP)
 4. Reset assertion down to 1V Vcc
 5. 160ms Min power-On erset
 6. -40C to +125C Operating temperature range.
 |  
								| 
									产品应用 | 1. 
								Microprocessor Systems 2. Controllers
 3. Intelligent instruments
 4. Automotive systems
 5. Safety systems
 6. Portable instruments.
 |  
								| 
									文字介绍 |  |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | 1. 
								SGM9119 is a Low-Voltage, triple video amplifier 
								can ofer 6dB Gain rail-to- rail output driver 
								and 5th order output reconstruction filter on 
								all three channels. 2. It has 8MHz -3dB bandwidth and 31.5V/us slew 
								rate.
 3. Operating form single power supply ranging 
								from 3.3V to 5.5V and sinking an 21mA quiescent 
								current.
 |  
								| 
									产品特性 | 1. Thriple 5rh 
								Order 8MHz (SD)filters 2. 6dB output driver gain
 3. Rail-to-Rail output.
 5. AC or DC coupled inputs
 6. AC or DC coupled outputs.
 7. Operates from 3.3V to 5.5V power supply.
 8. Supply current(7mA/Channel)/ 21mA total 
								supply current.
 9. -40C to +85C operating temperature range.
 |  
								| 
									产品应用 | 1. Cable and 
								Satelite STB 2. Video Amplifiers
 3. Communications Devices
 4. Portable and Handheld Products.
 5. Personal video recorders.
 6. Video on Demand
 7. DVD players.
 |  
								| 
									文字介绍 |  |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | 1. 
								SGM9124 is a Low-Voltage, 4-Channel video 
								amplifier can ofer 6dB Gain rail-to- rail output 
								driver and 5th order output reconstruction 
								filter on all three channels. 2. It has 8MHz -3dB bandwidth and 35V/us slew 
								rate.
 3. Operating form single power supply ranging 
								from 3.3V to 5.5V and sinking an 30mA quiescent 
								current.
 |  
								| 
									产品特性 | 1. 4-Channel 
								5rh Order 8MHz (SD)filters 2. 6dB output driver gain
 3. Rail-to-Rail output.
 5. AC or DC coupled inputs
 6. AC or DC coupled outputs.
 7. Operates from 3.3V to 5.5V power supply.
 8. Supply current(7mA/Channel)/ 21mA total 
								supply current.
 9. -40C to +85C operating temperature range.
 |  
								| 
									产品应用 | 1. Cable and 
								Satelite STB 2. Video Amplifiers
 3. Communications Devices
 4. Portable and Handheld Products.
 5. Personal video recorders.
 6. Video on Demand
 7. DVD players.
 |  
								| 
									文字介绍 |  |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | • 
								USB & AC Input with Automatic Input Selection 
								(SMB137B) • CurrentPath™ for Independent System and 
								Battery Charging Operation
 • TurboCharge™* for 50% Current Gain from 
								Current-limited Power Sources
 • Automatic Charger Input Current Adjustment 
								based on Wall Adapter Current Limit *
 • Automatic Power Source Detection per USB 1.0 
								Charging Specification
 • Integrated USB On-the-Go Power Support (+5V @ 
								500mA)
 •“Low-Battery Recovery *” Mode for Instant “Dead 
								Battery”Power On and Extended Talk/Standby Time
 • +3.5V to +6.2V Operating Input (+18V 
								Protection)
 • 3MHz Switch-Mode Operation (Chip Inductors)
 • Very low reverse leakage and shutdown current
 • I2C Programmable (Volatile and Non-volatile)
 • Fast/Pre-Charge/Termination Current
 • Float Voltage
 • Pre-Charge/Dead-battery Thresholds
 • Built-in Safety – supports IEEE 1725 standard
 • Input OV Protection to +18V
 • Battery OV/OC Protection
 • Trickle Charge for Deeply-Discharged Cells
 • Watchdog and Safety Timers
 • Digital Fault Monitors
 • Battery Temperature Mon
 |  
								| 
									产品特性 | 充電控制方面整合了輸入限流 
								AC/USB, 定電流/定電壓模式充電, 各項截止與安全保護的機制,全部都可以藉由 
								I²C/SMBus 
								介面來存取控制,提供設計者更快捷、更便利的開發途徑。此外,獨立的Enable(EN) 
								接腳可提供做為暫停充電/睡眠模式之用。OTG 的功能提供Device 
								電源,不需要額外設計電源。內建逆電流防制迴路可有效阻擋並降低因IC 
								Standy-By時,來自電池的放電損耗 |  
								| 
									产品应用 | • Mobile/Smart 
								Phones • Digital Cameras/Camcorders
 • Portable Media Players/Games
 • Handheld GPS Terminals
 |  
								| 
									文字介绍 | SMB137B具備USB/AC輸入、CurrentPath管理、快速充電模式、低電池容量恢復、AICL 
								及支援USB On-The-Go等功能,此元件為一可編輯開關式單顆鋰電池充電IC, 
								可供任何攜帶型產品應用。此方案透過USB 
								/AC充電器提供一個簡單及有效的充電模式。有別於以往傳統的充電設備,SMB137B的高效率電源開關模式消除了線性式方案中低充電電流及溫度的問題。除此之外,可編輯開關式的動作模式亦具備可快速充電(TurboCharge)的優點。 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Telechips - Arm11 system LSI】 |  |  |  
								|   | 
									产品规格 | ‧ 
								ARM 1176JZF-S ‧CPU 600 MHz @ 1.25V, 720MHz @1.45V
 ‧32 bits Data Bus
 ‧16KB ITCM / DTCM / 16KB I&D Caches
 ‧65nm CMOS Process
 |  
								| 
									产品特性 | Low power 
								consumption enhanced video decoding for all files
 |  
								| 
									产品应用 | PVR ,PMP, 
								Portable Navigation , Car AV/AVN , Jukebox |  
								| 
									文字介绍 | The TCC8900 is 
								the system LSI for digital multimedia 
								applications which based on ARM1176JZF-S, ARM’s 
								proprietary RISC CPU core. It can decode and 
								encode various types of video and audio 
								standards by software and dedicated hardware 
								accelerators – JPEG / MPEG1 / MPEG2 / 
								MPEG4-SP/ASP / H.264 / VC-1 / RV and other types 
								of video standard and MP3 /AAC / MPEG4-AAC / 
								MPEG4-BSAC and other types of standard for audio |  
								|  |  |  
 
					
						| 
							
								|  |  
								|   | 
									产品规格 | ‧16M-256M SDRAM ‧64M-256M DDR1
 ‧256M/512M/1G DDR2
 ‧1M-128M SPI Flash
 |  
								| 
									产品特性 | ‧标准型DRAM产品,65nm制程 ‧标准型SPI Flash产品,90nm制程
 |  
								| 
									产品应用 | PMP.MP3.MP4.PND… |  
								| 
									文字介绍 | winbond 
								标准型DRAM and SPI Flash产品,兼容市售主流品牌,广泛应用于各平台. 
								Winbond 
								产品均获得chipset供应商之认证,用于数据之暂存功能。其具有读写高速,兼容性好,高性价比的优点 
								Winbond 备有齐全的市场主流规格DRAM 和串口Flash可供选择,详情请洽SACL 
								相关行销人员。 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Wolfson - WM8310 Integrated Power 
										Management Subsystem】 |  |  |  
								|   | 
									产品规格 | Battery Charger • Programmable single-cell lithium-ion / 
								lithium-polymer battery charger (1A max charge 
								current)
 • Battery monitoring for temperature and voltage
 • Autonomous backup battery charging and 
								switching
 System Control
 • I2C or SPI compatible primary control 
								interface
 • Interrupt based feedback communication scheme
 • Watchdog timer and system reset control
 • Autonomous power sequencing and fault 
								detection
 • Intelligent power path and power source 
								selection
 • OTP memory bootstrap configuration function
 
 Additional Features
 • Auxiliary ADC for multi-function analogue 
								measurement
 • 128-bit pseudo-random unique ID
 • Secure Real-time clock with wake-up alarm
 • 12 x configurable multi-function (GPIO) pins
 • Comprehensive clocking scheme: low-power 32kHz 
								RTC crystal oscillator, Frequency Locked Loop, 
								GPIO clock output and 4MHz RC clock for power 
								management
 • System LED outputs indicating power state, 
								battery charger or fault status
 • Selectable USB current limiting up to 1.8A (in 
								accordance with USB Battery Charging 
								specification Rev 1.1)
 
 Package Options
 • 7x7mm, 169-ball BGA package, 0.5mm ball pitch
 |  
								| 
									产品特性 | • Integrated 
								32kHz XTAL Osc • Secure RTC for DRM
 • FLL and system clocking
 • OTP programmable startup/shutdown sequence and 
								startup voltages
 • Programmable wake/sleep sequence and sleep 
								voltages
 • Watchdog timer
 • Up to Sixteen multi-functional GPIOs
 • Control of external regulators
 |  
								| 
									产品应用 | • Portable 
								Media Players • Cellular Handsets
 • Electronic Books
 • Electronic Gaming Devices
 |  
								| 
									文字介绍 | 客制化WM8310包括了一個一次性可編程(OTP)存儲器,使得該設備可進行優化成最終用戶的系統。此外,配置的WM8310在產品開發過程中的修改可以經由使用外部EEPROM。除了大的靈活性,WM8310提供同級領先的性能與 
								BuckWise™DC - DC轉換技術。 
								BuckWise™採用谷值電流模式控制功能,使輸出電壓低於 
								0.8V的所有操作條件下,沒有任何性能損失。 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Wolfson - WM8904 Ultra Low Power Stereo 
										CODEC】 |  |  |  
								|   | 
									产品规格 | • 
								4mW quiescent power consumption for DAC to 
								headphone playback • 2.4mW quiescent power consumption for analogue 
								bypass playback
 • DAC SNR 96dB typical, THD -86dB typical
 • ADC SNR 91dB typical, THD -80dB typical
 • Control write sequencer for pop minimised 
								start-up and shutdown
 • Single register write for default start-up 
								sequence
 • Integrated FLL provides all necessary clocks
 - Self-clocking modes allow processor to sleep
 - All standard sample rates from 8kHz to 96kHz
 • Stereo digital microphone input
 • 3 single ended inputs per stereo channel
 • 1 fully differential mic / line input per 
								stereo channel
 • Digital Dynamic Range Controller (compressor / 
								limiter)
 • Digital sidetone mixing
 • Ground-referenced headphone driver
 • Ground-referenced line outputs
 • 32-pin QFN package (4x4mm, 0.4mm pitch)
 • 36-ball W-CSP package (6×6 ball grid, 0.4mm 
								pitch)+D5
 |  
								| 
									产品特性 | • Ultra-Low 
								Power • High quality audio CODEC
 • Wolfson Class W amplifier techniques
 • Simpler system design
 • Faster time to market
 • Small footprint
 • Low risk
 |  
								| 
									产品应用 | • Portable 
								Multimedia Players • Multimedia handsets
 • Handheld Gaming
 • Wireless Headsets
 |  
								| 
									文字介绍 | WM8904納入了Wolfson的 
								W類放大器技術,智能追踪實際的音樂信號級別,並使用一種自適應的雙驅動電荷泵來優化功耗。耳機輸出也無需大型直流隔離電容器,從而產生改進的低音響應,並顯著節省 
								PCB空間和音頻子系統的材料清單。 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Wolfson - WM8912 Ultra-Low Power Stereo 
										DAC with HP driver】 |  |  |  
								|   | 
									产品规格 | • 
								4mW quiescent power consumption for DAC to 
								headphone playback • DAC SNR 96dB typical, THD -86dB typical
 • Class W ground-referenced headphone driver
 - 28mW per channel into 32Ω at <1% THD
 - 30mW per channel into 16Ω at <1% THD
 • Dynamic range controller
 • ReTune™ Mobile parametric equalizer
 • Integrated control write sequencer for pop 
								minimised start-up and shutdown
 • Single register write for default start-up and 
								shutdown sequences
 • On-chip FLL provides all necessary clocks
 • DAC supports standard sample rates from 8kHz 
								to 48kHz
 • 32-pin QFN package (4x4mm, 0.4mm pitch)
 |  
								| 
									产品特性 | • Ultra-Low 
								Power • High performance audio DAC
 • Wolfson Class W amplifier techniques
 |  
								| 
									产品应用 | • Portable 
								Multimedia Players • Multimedia handsets
 • Handheld Gaming
 |  
								| 
									文字介绍 | WM8912使用了Wolfson創新的 
								SmartDAC™技術,獨特的低功耗DAC電容開關架構,它使DAC到耳機的功耗小於 
								4mW的。WM8912還納入了Wolfson的 
								W類放大器技術,G類的進化,其中包括一個自適應雙驅動電荷泵和直流伺服電路架構,消除了耳機輸出時所需要大的隔離直流電容器。 |  
								|  |  |  
 
					
						| 
							
								| 
									
										| 【Wolfson - WM9010 Class G Headphone 
										Driver】 |  |  |  
								|   | 
									产品规格 | • 
								Hi-fi audio headphone drivers (104dB SNR - ‘A’ 
								weighted) • Stereo analogue audio inputs
 • Ground-referenced, cap-less headphone outputs
 • Integrated charge pump and oscillator circuits
 • Low quiescent current
 • RF noise suppression
 • Pop and click suppression
 • 12-pin CSP package (1.84 x 1.34 x 0.7mm)
 |  
								| 
									产品特性 | • Automatic 
								input signal level detect for Class G mode • 1mA quiescent power consumption
 |  
								| 
									产品应用 | • Mobile 
								Handsets • Portable Media Players
 • LCD Televisions
 |  
								| 
									文字介绍 | WM9010是一款低功耗立體聲耳機驅動器設計用於手機和便攜式媒體播放器的應用。 
								G類放大器技術是用來實現高功率效率,低靜態電流。 可接受1Vrms立體聲類比訊號輸入;Hi - Fi的輸出驅動器可在 32Ω負載提供高達 
								28mW。
 |  |  |